Setting up [Parallel Data Out]

Setting up [Parallel Data Out]

Note

Operations of the ProcItem Setting window

For the basic operations of the ProcItem Setting window, see User's Manual, "Operations of ProcItem Setting Window".

In the Edit Flow window, tap [Parallel Data Out].
The ProcItem Setting window is displayed.
User's Manual, "ProcItem Setting Window"
In the "Item tab" area, tap [Setting] and set up the output contents.
For Details, see [Output Data Setting (Parallel Data Out)].

In the "Item tab" area, tap [Output format] and select [Format] in the "Output setting" area.

Output format - Output setting area

Table: Output format (Parallel data)
Set Value [Factory defaults]	Description
Binary	Data are outputted in the binary form of 2's complement. For 2's complement, see User's Manual, "Terminology".
BCD	Data are outputted with 4 digits representing 1 decimal and 16 digits representing the sign and 3-place integers. 15 to 12 digits Sign. (positive: 0000, negative: 1111) 11 to 0 digits With 4 digits representing 1 decimal, a value that has the digits position of 10 to the 6th power can be represented (27 to 24 digits: the 7th digits position) to - (3 to 0 digits: the first digits position)

Tap [OK].
After confirmation, the ProcItem Setting window will be closed.
In the "Control" area, check "Output" in [Test measurement setting] to enable the external output, and execute measurement.
User's Manual, "The Flow before Starting the Operation"
Verify measurement results.
User's Manual, "Display of the RUN Window"
When NG is displayed, please verify measurement results and make Adjust if necessary.