Points on Measurement Test and Adjustment (3D Edge Position)

In addition to the image from the camera, the measurement region and the edge position (the cross-shaped cursor) will also be displayed in the Image Display area.

In the "Detail result" area on the Main screen, you can confirm the following contents in text.

User's Manual, "Displaying Flow and Detail Result"

Table: Text Displayed (3D Edge Position)
Item	Description
Judge	Judgement result
Edge position X	X coordinate of the measured edge position
Edge position Y	Y coordinate of the measured edge position
Edge position Z	Z-coordinate of the measured edge position

Points on Adjustment

Select the adjustment method referring to the following points.

When the edge cannot be detected satisfactorily

Set up the options in [Measurement].
[Measurement (3D Edge Position)]
Specify the edge color in [Edge color].
[Edge Color - For Color Cameras Only (3D Edge Position)]

When noise is detected as an edge

Specify a higher value for "Noise level" or "Noise width" in [Measurement].
[Measurement (3D Edge Position)]