Skip headerBackNext
Processing Items List Manual
 Processing item List > Chapter 6 - Result Output > Data Output > [Output format (Data Output)]

[Output format (Data Output)]

  1. In the "Item tab" area, tap [Output format].
  2. In the "Output setting" area, select the communication method.
    Output format - Output Setting area
    Table: Output Format (Data Output) - Output Setting - Communication Method
    Set Value
    [Factory Default]
    Description
    [RS-232C/RS-422]
    Communication is performed via a RS-232C/RS-422 connection.
    Ethernet
    Communication is performed via the Ethernet.
  3. In "Format setting", select the output format.
    Output format - Output Setting area
    Table: Output Format (Data Output) - Output Setting - Format Setting
    Set Value
    [Factory defaults]
    Description
    [ASCII]
    Outputs in the ASCII format. The ASCII is represented in 7 digits, and composed of 128 Roman numbers, numeric numbers, operators, and control codes.
    Binary
    Outputs in the binary format. Outputs the Value multiply 1,000 with each digits being represented by 4 bytes.
    When the ASCII output format is selected
    When "ASCII" is specified as the output format, set up the following options among the format settings.
    Whereas "Binary" is selected, no setup is needed.
    Output format - Output Setting area
    Table: Output Format (Data Output) - Output Setting - Format Setting when [ASCII] is specified
    Setting Options
    Set Value
    [Factory defaults]
    Description
    Digits of integer
    1 to [10]
    Specify the width of the integer part including the sign. For positive numbers, the plus sign is not output.
    Example
    Setting: 4 places, data: -5,619
    output -999.
    Digits of decimal
    0 to [4]
    Specify the places of the output Digits of decimal. When 0 is selected, the Digits of decimal will be rounded up.
    Minus
    • [-]
    • 8
    When a Minus is selected, what is displayed in the sign place.
    0 suppress
    • ON
    • [OFF]
    Select to deal with the blank place to the left side of the output data or not.
    ON: Insert 0 into the blank place.
    OFF: Insert the space sign into the blank place.
    Example)
    Digits of integer: 5 places, Digits of decimal: 3 places.
    When the data is 100.000
    ON: 00100.000
    OFF: _100.000 (denoting the space)
    Field separator
    • OFF
    • [Comma]
    • Tab
    • Space
    • Delimiter
    Select the separator for output data.
    * The delimiter is obtained from the system.
    Record separator
    • OFF
    • Comma
    • Tab
    • Space
    • [Delimiter]
    Select the separator each time data is outputted.
    * The delimiter is obtained from the system.
  4. If you have selected "Ethernet" for "Communication method", configure for Ethernet.
    Output format - Output Setting area
    Table: Output format (Data output) - Output setting - Ethernet
    Set Value
    [Factory Default]
    Description
    [Refer System(system -comm -Ethernet)]
    The following IP address
    Output IP address
    Enter the destination IP address.
For the following operations, see Setting up [Data Output].
Top
BackNext
Copyright© 2007 OMRON Corporation All Rights Reserved.