Camera Setting Option List

You can perform detailed camera settings in [Camera Image Input]. The following items are available for camera settings. For details and settings of each item, see the respective reference page.

Note

The setting options differ depending on the camera type and lighting mode.
Camera/Lighting Combination and Available Functions

Table: Camera Setting Option List
Item			Description
Camera setting			Specify the camera settings such as the shutter speed or flashlight. [Camera Setting (Camera Image Input)]
	Camera settings		Specify the shutter speed and the camera gain. Camera Settings
	Frame/Field		Select the unit to be treated as one image. This area is displayed only when a monochrome camera is used. Frame/Field - for Monochrome Cameras Only
	Number of lines to be read		Narrow the image range to be scanned. Number of Lines to be Read
	Electronic flash setting		Specify flashlight settings. Electronic Flash Setting
Screen adjust			Adjust the lighting and the lens. [Screen Adjust (Camera Image Input)]
	Lighting control		Adjust the amount of light (brightness) of the lighting. Lighting Control
	Lens setting		Adjust the camera zoom, focus, and iris. Lens Setting (When Connecting an Intelligent Camera or an Auto-focus Camera)
	Common setting for all cameras		Set the target area to apply the automatic setting for focus, iris, and white balance, and specify the iris base density. Common Setting for All Cameras (When Connecting an Intelligent Camera or an Auto-focus Camera)
White Balance Setting			Adjust the white balance. [White Balance (Camera Image Input)]
Calibration setting			Set when measurements (measurements in camera coordinates) are to be output in actual dimensions. Select the calibration setting method and generate the calibration parameters. [Calibration Setting (Camera Image Input)]
	Calibration method		The following pattern generation methods are available. Select the appropriate method.
		Point defining	Specify a point in pixels to generate the calibration parameters. Setting up by Specifying any Points (Point)
		Specify value	Specify a numeric value and generate the calibration parameters. Setting up calibration by entering values (Parameter)
		Sampling	Perform a sampling measurement to generate the calibration parameters. Setting up Calibration by Sampling Measurement (Sampling)
	Calibration parameter		Check the calibration settings. View Calibration Parameters