Skip headerBackNext
Processing Items List Manual
 Processing Item List > Inspecting and Measuring > Sophisticated Labeling+ > Measurement Parameters (Sophisticated Labeling+)

Measurement Parameters (Sophisticated Labeling+)

Set the labeling conditions.Specify the labeling processing, number of labels and sorting conditions.
Measurement parameter can be changed as needed to address unstable measurement results or to increase the processing speed.Normally, the factory default value will be used.
  1. In the "Item tab" area, tap [Measurement].
  2. If necessary, in the "Labeling Method" area, specify a value for each item.
    When labeling processing is set to be performed, the feature quantities are measured for each extracted label.When labeling processing is set to not be performed, the feature quantities are measured treating all the extracted labels as one label.
    Measurement parameters - "Labeling processing" area
    When labeling processing is set to be performed, the following items are set.
    When the Sort Condition is other than gravity XY, Inscribed circle XY and Circum. circle XY
    Measurement parameters - "Labeling Condition" area
    Setting item
    Set value
    [Factory default]
    Description
    Sort method
    • [Area]
    • Gravity X
    • Gravity Y
    • Gravity XY
    • Elliptic axis angle
    • Elliptic major axis
    • Elliptic mainor axis
    • Elliptic ratio
    • Rectangle width
    • Rectangle height
    • Rectangle X1
    • Rectangle Y1
    • Perimeter
    • Circularity
    • Fit rect mejor axis
    • Fit rect minor axis
    • Fit rect ratio
    • Inscribed circle X
    • Inscribed circle Y
    • Inscribed circle XY
    • Inscribed circle R
    • Circum. circle X
    • Circum. circle Y
    • Circum. circle XY
    • Circum. circle R
    • Number of holes
    Specify the conditions by which label number is re-assigned.
    The label number is assigned according to the value of the selected feature quantity.
    When gravity XY, Inscribed circle XY, or Circum. circle XY is selected, grouping is performed in the vertical or horizontal direction and labels re-assigned within those groups.
    This is used for assigning numbers to labels lined up in a grid.
    Sort order
    • Ascending
    • [Descending]
    Set the direction for sorting.
    Ascending: Numbers are assigned from smaller values to larger.
    Descending: Numbers are assigned from larger values to smaller.
    Label No.
    [0] to 2499
    Input the label number for the data to be output.
    When the sort condition is gravity XY, Inscribed circle XY, or Circum. circle XY (condition with Advanced setting pressed)
    Measurement parameters - "Labeling Condition" area
    Setting item
    Set value
    [Factory default]
    Description
    Sort method
    • Area
    • Gravity X
    • Gravity Y
    • Gravity XY
    • Elliptic axis angle
    • Elliptic major axis
    • Elliptic mainor axis
    • Elliptic ratio
    • Rectangle width
    • Rectangle height
    • Rectangle X1
    • Rectangle Y1
    • Perimeter
    • Circularity
    • Fit rect mejor axis
    • Fit rect minor axis
    • Fit rect ratio
    • Inscribed circle X
    • Inscribed circle Y
    • Inscribed circle XY
    • Inscribed circle R
    • Circum. circle X
    • Circum. circle Y
    • Circum. circle XY
    • Circum. circle R
    • Number of holes
    Specify the conditions by which label number is re-assigned.
    The label number is assigned according to the value of the selected feature quantity.
    When gravity XY, Inscribed circle XY, or Circum. circle XY is selected, grouping is performed in the vertical or horizontal direction and labels re-assigned within those groups.
    This is used for assigning numbers to labels lined up in a grid.
    Sort kind
    • Col sort
    • [Row sort]
    Selects the axis for grouping.
    When Col sort is selected, groups are made along the Y axis.
    When Row sort is selected, groups are made along the X axis.
    Row order（Y dir.)
    • Ascending
    • [Descending]
    Specifies the axis for ordering groups.
    Ascending: Numbers are assigned from groups with smaller Y coordinates.
    Descending: Numbers are assigned from groups with larger Y coordinates.
    When Row sort is selected, group numbers are assigned along the X axis according to the column sequence.
    Sort order(X dir.)
    • Ascending
    • [Descending]
    Specifies the axis for assigning numbers to labels within groups.
    Ascending: Numbers are assigned from labels in the group with smaller X coordinates.
    Descending: Numbers are assigned from labels in the group with larger X coordinates.
    When Row sort is selected, label numbers are assigned are along the Y axis.
    Label No.
    0 to 2499
    Input the label number for the data to be output.
    Set details as necessary.
    Measurement parameters - "Labeling Condition" area
    Setting item
    Set value
    [Factory default]
    Description
    Col group width
    1 to 255
    [1]
    Input the length for making groups.
    If separate labels are present within the group length of an individual label position, they are put in the same group.
    When Row sort is selected, if separate labels are present within the group width, they are put in the same group.
  3. If necessary, set the drawing setting values.
    When the Sort Condition is other than center of gravity XY, Inscribed circle XY and Circum. circle XY
    Measurement parameters - "Drawing setting" area
    When the Sort Condition is gravity XY, Inscribed circle XY and Circum. circle XY
    Measurement parameters - "Draw setting" area
    Setting item
    Set value
    [Factory default]
    Description
    Label No.
    • [Checked]
    • Unchecked
    Place a check here to display label numbers.
    Feature
    • [Checked]
    • Unchecked
    When checked, the feature quantities selected for judgement condition display are displayed on the image.When the feature quantity is number of labels, area, center of gravity, Perimeter, circularity, or number of holes, it is not displayed.
    Row/Col group
    • [Checked]
    • Unchecked
    Place a check here to display the line/column region.
Top
Skip headerBackNext
Copyright© 2008 OMRON Corporation All Rights Reserved.