Reference Position (Sophisticated Labeling+)

This item can be changed if necessary.When the region is set, the reference position is automatically set at the center of gravity of the measurement region.In the same way for the reference area, when the region settings are made, they are set automatically based on the measurement region.
This item can be used to change the reference position to any desired position.
  1. In the "Item tab" area, tap [Ref. position].
    In the "Image display" area, the current reference position will be displayed as the crosshair cursor.
  2. Tap the position to be set as the reference position.
    Reference position - "Image display" area
    Note
  3. If necessary, finely adjust with numeric input and the arrow buttons.
    When changing the registered angle, adjust the reference angle.
    Reference position - "Reference coordinate setting" area
  4. If necessary, in the "Display setting" area, set up display settings for the images displayed in the "Image display" area.
    For color cameras:
    Reference position - "Display setting" area
    Setting item
    Set value
    [Factory default]
    Description
    Extract image
    • [Checked]
    • Unchecked
    If you place a check at this option, images set with color specification are displayed.
    For monochrome cameras:
    Reference position - "Display setting" area
    Setting item
    Set value
    [Factory default]
    Description
    Binary image
    • [Checked]
    • Unchecked
    The image is displayed in binary with black and white.