Setting the Display Method for 3D Display (3D Result Display)

Set the method to display images in 3D display. You can set the azimuthal and elevation display angles.

Specify the image display angle.

Table: 3D Display (3D Result Display)
Setting Item	Set Value [Factory default]	Description
Azimuthal	0 to 359 [315]	Specify the azimuthal angle (θ).
Elevation	0 to 90 [45]	Specify the elevation angle (φ).

Rough setting

Tap [Rotation] to the right of each item.
With azimuthal angle, the image turns 360 degrees from the current setting.
With elevation angle, the image moves in steps of 90 degrees from the current setting.

When adjusting the values manually

Drag the slider while verifying the image in the "Image display" area.
After the automatic setting, individual fine-tuning can still be performed.

Fine-tuning

Tap the buttons at both ends of the slider.

Specifying values manually:

Tap [...] of each item and set values.
How to input a value:

User's Manual, "Inputting a Value"

Set magnification to display images.

Table: 3D Display (3D Result Display)
Setting Item	Set Value [Factory default]	Description
Scale	-1.0 to 1.0 [-0.1]	Specify magnification to display 2D images. The value is the power of ten. Example: When setting 0.0, the size will be the same. When setting 0.5, the size will be 5 times as large.
Zscale	-1.0 to 1.0 [0.0]	Specify the magnification scale of the Z-axis (height). The value is the power of ten. Example: When setting 0.0, the size will be the same. When setting 0.5, the size will be 3.16227766 times as large.

Set the image display position.

Table: 3D Display (3D Result Display)
Setting Item	Set Value [Factory default]	Description
Movement X	For a camera with more than 640 x 480 pixels: -800 to 800 For a camera with 640 x 480 pixels or less: -320 to 320	Specify movement in the X-axis direction. The movement is from the basic point 320 pix.
Movement Y	For a camera with more than 640 x 480 pixels: -600 to 600 For a camera with 640 x 480 pixels or less: -240 to 240	Specify movement in the Y-axis direction. The movement is from the basic point 240 pix.

Select whether or not to display a mesh in the "Image display" area.

Table: 3D Display (3D Result Display) - Mesh Setting
Setting Item	Set Value [Factory default]	Description
Mesh setting	[ON]	A mesh is displayed in the "Image Display" area. You can set the details for the mesh by tapping [Detail].
Mesh setting	OFF	The mesh is not displayed in the "Image Display" area.

Example of mesh display

3D Result Display - Mesh Display Example

When "Mesh setting" is set to "ON", you can set the mesh size, line type and color, etc.

Tap [Detail].
In the "Detail" area, items for setting mesh details are displayed.

Set up the necessary items.

3D Result Display - Mesh Details Setting Area

Table: 3D Display (3D Result Display) - Mesh Detail Setting
Setting Item		Set Value [Factory default]	Description
Position X			Specify the details for the X coordinate for the mesh.
	Distance	Expression string (256 characters or less) [40]	Specify the width of the X coordinate for the mesh (in pixels). When the value of the expression is a negative number, the image is not displayed in the image region.
Position Y			Specify the details for the Y coordinate for the mesh.
	Distance	Expression string (256 characters or less) [40]	Specify the width of the Y coordinate for the mesh (in pixels). When the value of the expression is a negative number, the image is not displayed in the image region.
Position Z			Specify the details for the Z coordinate for the mesh.
	Distance	Expression string (256 characters or less) [20]	Specify the width of the Z coordinate for the mesh (in pixels). When the value of the expression is a negative number, the image is not displayed in the image region.
	Height	Expression string (256 characters or less) [100]	Specify the height of the Z coordinate for the mesh (in pixels).
Line kind		Solid [Dash line]	Select the type of the line for the mesh.
RGB		R: 0 to [255] G: 0 to [255] B: 0 to [255]	Specify the color of the mesh.

Select whether or not to set the background color of the "Image Display" area.

Table: 3D Display (3D Result Display) - Back Color Setting
Setting Item	Set Value [Factory default]	Description
Back color setting	ON	You can set the background color by tapping [Detail]. If a background color has been specified, the specified background color is displayed.
Back color setting	[OFF]	The background is displayed in black.

Display example of background color

3D Result Display - Example of "Back Color Display"

When "Back color setting" is set to "ON", you can set a background color.

Tap [Detail].
In the "Detail" area, items for setting details for the background color are displayed.

Specify a background color.

3D Result Display - Back Color Detailed Area

Table: 3D Display (3D Result Display) - Back Color Detailed
Setting Item	Set Value [Factory default]	Description
RGB	R: 0 to [255] G: 0 to [255] B: 0 to [255]	Specify a background color.

Tap [OK].
The details for 3D display are registered, and the "3D result display list" area is displayed.

For the subsequent operations, see

Setting Up [3D Result Display].