[Measurement (3D Height)]

Specify the judgement condition for measurement results. Specify the criteria to judge the measurement results of X, Y, and Z coordinates and their correlation with the model as OK.

In the "Item tab" area, tap [Measurement].

In the "Detail" area, tap [...] for "Candidate LV" and specify a value.

The value can also be adjusted by tapping [<] and [>].
How to input a value:

User's Manual, "Inputting a Value"

Table: Measurement (3D Height)
Setting Item	Set Value [Factory default]	Description
Candidate LV	0 to 100 [70]	Specify the threshold value with which to detect candidate points in a rough search. Specify a smaller value when model search results are unstable.

When the setting has been changed, tap [Measure] in the "Detail" area to verify whether measurements can be made correctly.
After the measurements, the results are reflected on the values in the "Judgement condition" area.

In the "Judgement condition" area, tap [...] and input a value for each item.

How to input a value:

User's Manual, "Inputting a Value"

Note

The values displayed in the individual fields are the measurement results of the displayed image. Take these values into consideration to determine the upper and lower limits.

Table: Measurement (3D Height) - Judgement Condition
Setting Item		Set Value [Factory default]	Description
Position X	Upper	-99999.9999 to [99999.9999]	Specify the range of X-axis shifting that is judged to be OK.
Position X	Lower	[-99999.9999] to 99999.9999
Position Y	Upper	-99999.9999 to [99999.9999]	Specify the range of Y-axis shifting that is judged to be OK.
Position Y	Lower	[-99999.9999] to 99999.9999
Position Z	Upper	-99999.9999 to [99999.9999]	Specify the range of Z-axis shifting that is judged to be OK.
Position Z	Lower	[-99999.9999] to 99999.9999
Correlation 1 (Note 1)	Upper	0 to [100]	Specify the range of correlation values that are judged to be OK.
Correlation 1 (Note 1)	Lower	0 to 100 [60]
Correlation 2 (Note 1)	Upper	0 to [100]	Specify the range of correlation values that are judged to be OK. This can only be set when three cameras are connected.
Correlation 2 (Note 1)	Lower	0 to 100 [60]
Margin 1	Upper	0 to [9999.9999]	Allowable deviation for camera 1 relative to camera 0. This item specifies the allowable value for the relative camera shift that may occur after 3D coordinates are set.
Margin 2	Upper	0 to [9999.9999]	Allowable deviation for camera 2 relative to camera 0. This item specifies the allowable value for the relative camera shift that may occur after 3D coordinates are set.
Accuracy	Upper	0 to [9999.9999]	Set only when three cameras are connected. This item specifies the allowable difference when the same coordinates are measured with both camera 0+1 and camera 0+2.

[Note 1]: When the Correlation value of the measurement result is 0, the judgement result will be NG regardless of the Measurement settings.

For the subsequent operations, see

Setting up [3D Height].