Points on Measurement Test and Adjustment (Flexible search)

In addition to the camera image, the model and the search coordinates (the cross-shaped cursor) will also be displayed in the "Image display" area.

In the "Detail result" area on the Main screen, you can confirm the following contents in text.

Table: Text Displayed (Flexible Search)
Item	Description
Judge	Judgement result
Model No.	Model No. with the largest correlation value
Correlation	Correlation
Measured coordinate X	X coordinate of the position where the model is detected
Measured coordinate Y	Y coordinate of the position where the model is detected
Angle	Angle of the position where the model is detected

Please choose your Adjust methods as follows.

To improve the search accuracy, the following Adjust should be made to [Measurement].

In [Region setting], reduce the measurement region and set up again.
[Region Setting (Flexible Search)]
Reduce the region registered in the model in [Model registration].
[Model (Flexible Search)]

In addition, adjust other options in the "Model parameter" area of [Model].

Reduce the measurement region size in [Region Setting].
[Region Setting (Flexible Search)]

Reduce the amount of information necessary for measurements by making the following adjustment in the "Model parameter" area of [Model].

Note

If lowering "Stab." leads to slower processing, it is likely that many candidates have been detected. In this case, specify a larger value for "Candidate LV" or "Stab."