Saving Setting Data in the Controller's Memory [Data save]

Saves system data and scene group data on the controller's flash memory.

Important

When the message to tell that saving is in operation is displayed, do not restart or turn off the power. Otherwise, it will lead to data loss and failure of operation.
During a data transfer to USB memory, do not remove the USB memory until the transfer is completed. Data and/or the USB memory may corrupt.

Note

When using Scene Group 1 to 31, what can be saved in the controller's flash memory is only the system data. Note, however, that if a USB memory device is plugged in, scene group data can be saved to the USB memory.

On the Main screen, tap [Data save] in the Toolbar.
A confirmation message is displayed.
Note
- An alternative operation: tap [Data] - [Data save].
Tap [Yes].
System data and scene group data are saved on the controller's flash memory.

Plug a USB memory device into the controller.
On the Main screen, tap [Data save] in the Toolbar.
A confirmation message is displayed.
Note
- An alternative operation: tap [Data] - [Data save].
Tap [Yes].
System data is saved to the controller's flash memory and scene group data is saved to the USB memory respectively.
Note
- If a USB memory device is not plugged in, the message to check it is displayed.
  If you tap [Yes], only system data is saved on the controller's flash memory.
  If you tap [No], the operation is interrupted and the display returns to the Main screen.