Output Parameters (Labeling+)

Specify how to treat the coordinates to be output to the external device as measurement results.This item can be changed if necessary.Normally, the factory default value will be used.
Important
  • After setting up the measurement parameters, changing the output parameters will cause measurement results to vary accordingly.If the output parameters have been changed, re-specify the measurement, too.
  1. Tap [Output parameter] in the Item Tab area.
  2. Specify each of the following items.
    Output parameter - "Detail" area
    Setting item
    Set value
    [Factory default]
    Description
    Output Coordinates
    • [After scroll]
    • Before scroll
    As measurement results, select whether to output coordinate values to external devices before or after the position deflection correction is applied.
    Calibration
    • [OFF]
    • ON
    Select whether to reflect the calibration in the values output to the external device as measurement results.
    ON: Output the coordinates converted into actual dimensions.
    OFF: Output the camera coordinate values.
    Reflect to overall judgement
    • [ON]
    • OFF
    Enables choosing whether or not the judgement result of this processing unit is reflected in the scene overall judgement.