Saving Settings and Turning Power Off

Before turning off power to the controller, perform the following operations to save the data that you have set.

The controller loads scene data from the flash memory each time during start-up. Therefore, if the power is turned off without saving data to the flash memory, any changes made will not be saved.

On the Main screen (ADJUST window), tap [Data save] in the toolbar to save the setting data.
Exit after powering off the controller.
Reference
- Data to be saved
  Scene data and system data are saved in the controller. Logging images and data saved in the RAMDisk are not saved. Perform any of the following procedures to keep this data.
  - Copy data saved in the RAMDisk to the USB memory.
  Copying/Moving Files
  - Change the save destination of logging data to USB memory.
  Saving Logging Images to RAMDisk/USB Device
- When using the scene group function
  The scene data set in Scene group 0 is saved in the controller. The scene data from scene groups 1 to 31 is saved to the USB memory and overwrites previous saved data. (For FZ3-9/H9, all data are saved in the controller.)