Reference Position (Area Gravity Center)

When the measurement region is set, the center of gravity is automatically set at the same time as the reference position.This item is used to change the reference position to any desired position.This is handy for measuring the positional deviation from a certain position.In the same way for the reference area, when the region settings are made, they are set automatically based on the measurement region.
  1. In the "Item tab" area, tap [Ref. position].
    In the "Image display" area, the current reference position will be displayed as the crosshair cursor.
  2. Tap the position to be set as the reference position.
    Reference position - "Image display" area
    Note
  3. If necessary, finely adjust with numeric input and the arrow buttons.
    Reference position - "Reference coordinate setting" area
  4. If necessary, in the "Display setting" area, set up display settings for the images displayed in the "Image display" area.
    For color cameras:
    Reference position - "Display setting" area
    Setting item
    Set value
    [factory default]
    Description
    Extract image
    • [Checked]
    • Unchecked
    If you place a check at this option, images set with color specification are displayed.
    For monochrome cameras:
    Reference position - "Display setting" area
    Setting item
    Set value
    [factory default]
    Description
    Binary image
    • [Checked]
    • Unchecked
    The image is displayed in binary with black and white.