Camera Placement (Panorama+)

Set the camera placement.
  1. In the "Item tab" area, tap [Arrangement].
  2. In the "Display" area, tap [Change display] to switch between camera image types.
    Camera placement+ - "Display" area
    The displayed contents of the image display area will be switched.
    Setting item
    Set value
    [Factory default]
    Description
    ON
    Through
    The latest image is always input from the camera and displayed.
    [Freeze]
    The image that was scanned in the immediately preceding measurement is displayed.
  3. Set the camera settings.
    Camera placement+ - "Camera setting" area
    Setting item
    Set value
    [Factory default]
    Description
    Select camera
    • [0+1]
    • 0+1+2
    • 0+1+2+3
    Select the combination of cameras to combine the images from.
    0+1: Combine the images from Camera0 and Camera1.
    0+1+2: Combine the images from Camera0, Camera1, and Camera2.
    0+1+2+3: Combine the images from Camera0, Camera1, Camera2, and Camera3.
  4. Set the camera placement.
    Camera placement+ - "Camera placement" area
    Setting item
    Set value
    [Factory default]
    Description
    Arrangement
    • [One line]
    • Two line
    Set the camera image placement.
    Panorama+ sample image
    Panorama+ sample image
    Important
    • If the configuration of the connected camera is changed, the measurement result is NG (incompatible image).Press the initialize button and re-do the settings.