Key Points for Test Measurement and Adjustment (Shape Search+)
The following content is displayed in the "Detail result" area as text.
Displayed items | Description |
---|
Judge | Judgement result |
Count | Count |
Correlation value | Correlation value |
Measure X | X coordinate of the position where the model is detected |
Measure Y | Y coordinate of the position where the model is detected |
Angle θ | Angle of the position where the model is detected |
Key Points for Adjustment
Select the adjustment method referring to the following points.
When the measurement results are unstable
Parameter to be adjusted | Remedy |
---|
Model parameter | Register the model from the following two perspectives. - Register the model figure frame enclosing the boundaries of the target.
In order to detect based on the edge information, improvement is made by including boundary information in the registration. - When a model is registered near the boundary of the image or measurement region, some targets may be impossible to detect.
Register the model leaving space from the boundary of the image or measurement region.
|
Measurement parameter | - Specify a larger value for "Candidate LV".
- Specify a smaller value for the "Search skipping Level" in the detailed settings.
These two settings have a trade-off with speed. Make the setting taking the affect on speed into consideration. |
When the processing speed is slow
Parameter to be adjusted | Remedy |
---|
Model parameter | Specify a narrower "Angle range". |
Region setting | Specify a smaller value for "Measurement region". |
Measurement parameter | - Set the "Sub-pixel level" in the detailed settings to "Fast".
This setting has a trade-off with precision. Change this setting according to what the application is used for. |
- Specify a larger value for "Candidate LV".
- Specify a smaller value for the "Search skipping Level" in the detailed settings.
These two settings have a trade-off with speed. Make the setting taking the affect on speed into consideration. |