Command Format (Non-procedure)

This section explains the format of commands used in the non-procedure method.

When Ethernet is used

For Ethernet connections, delimiters are not required at the end of commands.
As with scene No. acquisition commands, when acquisition data and an OK response exist next to each other, a space (0x20) is inserted between the acquisition data and the OK response and this information is grouped and sent as one packet.

Command List (Non-procedure)

Input format example (When using DISPCOND to acquire the display status)

<Command format>

<Response format>

Important

With serial data output (when Ethernet output is set), up to 128 units can be registered. Note, however, that not all data may be received depending on the network environment being used, PC performance, and the software for receiving data.

When serial interface (RS-232C/422 connection) is used

Communication specifications are performed according to the settings in

Setting Communication Specifications (RS-232C/422 - Non-procedure)

Example of input format (SCENE command)

Enter a delimiter at the end of commands.
In this manual, delimiters are expressed with "

Separate parameters with spaces. (Not required before delimiters.)

In the following cases, an error occurs. The system quits abnormally and the return values are returned when an error occurs.

When non-existing commands are specified
The number of parameters is incorrect
The range of the parameters is incorrect
The content of parameters is incorrect
When action cannot be ended correctly with an action instruction command

Important

Commands can be input and measurement results can be output only when the Main screen is at the front. Cannot receive commands when setting windows or the Edit flow windows are displayed (excluding "Serial" - "Confirmation"). On the Main screen, even if the screen is switched to the Edit Flow window, etc., the data output after measurement will not be interrupted before all data is output. Commands cannot be accepted when windows other than the Main screen are displayed.