[Measurement (3D Circle Search)]

Specify the judgement condition for measurement results.

In the "Item tab" area, tap [Measurement].
When the setting has been changed, tap [Measure] in the "Detail" area to verify whether measurements can be made correctly.
After the measurements, the results are reflected on the values in the "Judgement condition" area.

In the "Judgement condition" area, tap [...] and input a value for each item.

How to input a value:

User's Manual, "Inputting a Value"

Note

The values displayed in the individual fields are the measurement results of the displayed image. Take these values into consideration to determine the upper and lower limits.

Table: Measurement (3D Circle Search) - Judgement Condition
Setting Item		Set Value [Factory default]	Description
Position X	Upper	-99999.9999 to [99999.9999]	Specify the upper and lower limits for judging the 3D X-coordinate.
Position X	Lower	[-99999.9999] to 99999.9999
Position Y	Upper	-99999.9999 to [99999.9999]	Specify the upper and lower limits for judging the 3D Y-coordinate.
Position Y	Lower	[-99999.9999] to 99999.9999
Position Z	Upper	-99999.9999 to [99999.9999]	Specify the upper and lower limits for judging the 3D Z-coordinate.
Position Z	Lower	[-99999.9999] to 99999.9999
Circle value 0	Upper	60 to [100]	Specify the upper and lower limits for judging the camera 0 image circle evaluated value.
Circle value 0	Lower	[60] to 100
Circle value 1	Upper	60 to [100]	Specify the upper and lower limits for judging the camera 1 image circle evaluated value.
Circle value 1	Lower	[60] to 100
Circle value 2	Upper	60 to [100]	Specify the upper and lower limits for judging the camera 2 image circle evaluated value. (Settable only when three cameras are connected)
Circle value 2	Lower	[60] to 100
Radius 0	Upper	0 to [99999.9999]	Specify the upper and lower limits for judging the radius on the camera 0 image.
Radius 0	Lower	[0] to 99999.9999
Radius 1	Upper	0 to [99999.9999]	Specify the upper and lower limits for judging the radius on the camera 1 image.
Radius 1	Lower	[0] to 99999.9999
Radius 2	Upper	0 to [99999.9999]	Specify the upper and lower limits for judging the radius on the camera 2 image. (Settable only when three cameras are connected)
Radius 2	Lower	[0] to 99999.9999
Margin 1	Upper	0 to [99999.9999]	Specify the upper limit for judging the vertical length to the epipolar line of camera 1.
Margin 2	Upper	0 to [99999.9999]	Specify the upper limit for judging the vertical length to the epipolar line of camera 2. (Settable only when three cameras are connected)
Accuracy	Upper	0 to [99999.9999]	Specify the upper limit for judging the accuracy evaluated value. (Settable only when three cameras are connected)

For the subsequent operations, see

Setting up [3D Circle Search].