Skip headerBackNext
Processing Items List Manual
 Processing item List > Chapter 1 - Image Input > 3D Camera Switching > Setting up [3D Camera Switching]

Setting up [3D Camera Switching]

  1. In the Edit Flow window, tap [3D Camera Switching].
    The ProcItem Setting window is displayed.
    User's Manual, "ProcItem Setting Window"
  2. In the "Camera select" area, tap [Icon] for "Camera No." and select a camera combination to be used for the measurements.
    3D Camera Switching - Camera select Area
    Table: 3D Camera Setting (3D Camera Switching)
    Setting Item
    Set Value
    [Factory Default]
    Description
    Camera No.
    • [Camera 0+1]
    • Camera 2+3
    The "Image display" area will display images from each camera.
    • When Camera 0+1 is selected
      Left side: Camera 0
      Right side: Camera 1
    • When Camera 2+3 is selected
      Left side: Camera 2
      Right side: Camera 3
  3. Tap [OK].
    After confirmation, the ProcItem Setting window will be closed.
Top
BackNext
Copyright© 2007 OMRON Corporation All Rights Reserved.