Skip header BackNext
Processing Items List Manual
 Processing Item List > Measurement > Scan Edge Width > Judgement Conditions (Scan Edge Width)

Judgement Conditions (Scan Edge Width)

Specify the range to be judged as OK.
  1. In the Item Tab area tap [Judgement].
  2. Set up the judgement condition.
    Judgement - "Judgement condition" area
    Note
    • The values beside each item are measurement results of the displayed image.Take these values into consideration to determine the upper and lower limits.
    Setting item
    Set value
    Description
    Edge width Max.
    0 to dist (X_MAX,Y_MAX)
    Specify the upper and lower limits of the maximum width judged to be OK.
    Edge width Min.
    0 to dist (X_MAX,Y_MAX)
    Specify the upper and lower limits of the minimum width judged to be OK.
    Edge width Ave.
    0 to dist (X_MAX,Y_MAX)
    Specify the upper and lower limits of the average width judged to be OK.
    Lost width count
    0 to 100
    Specify the upper and lower limits of the lost width count judged to be OK.
    * dist (X_MAX,Y_MAX) = sqrt (X_MAX*X_MAX+Y_MAX*Y_MAX)
Top
Skip header BackNext
Copyright© 2008 OMRON Corporation All Rights Reserved.