[3D Setting: Pattern Lighting (3D Camera Image Input)]
Set the lighting of all cameras connected to the controller.
- Tap [3D setting] in the "Item tab" area (top) and tap [Pattern lighting] in the "Item tab" area (bottom).
- Make setting for the lighting.
To have continuous lighting
Tap [Continuous lighting].
The lighting setting of all connected cameras changes their power of lighting to 50%.
A [Continuous lighting] message is displayed.
Note - No other operation can be performed during continuous lighting.
To cancel continuous lighting
The lighting of all connected cameras return to default lighting setting (50% power lighting setting is canceled).